Link speed and duplex settings

Link speed and duplex settings

NOTE

Incorrect changes to the link speed and duplex settings might prevent the printer from communicating with other network devices. For most situations, the printer should be left in automatic mode. Also note that changes will cause the printer to power cycle. Changes should only be made while the printer is idle.

1. On the control panel menu, press HP Color Laserjet 2605 tcn cp go Link speed and duplex settings (Select).
2. Use the HP Color Laserjet 2605 y arrow left Link speed and duplex settings (Left arrow) or HP Color Laserjet 2605 y arrow right Link speed and duplex settings (Right arrow) button to select Network config., and then press HP Color Laserjet 2605 tcn cp go Link speed and duplex settings (Select).
3. Use the HP Color Laserjet 2605 y arrow left Link speed and duplex settings (Left arrow) or HP Color Laserjet 2605 y arrow right Link speed and duplex settings (Right arrow) button to select Link Speed, and then press HP Color Laserjet 2605 tcn cp go Link speed and duplex settings (Select).
4. Use the HP Color Laserjet 2605 y arrow left Link speed and duplex settings (Left arrow) or HP Color Laserjet 2605 y arrow right Link speed and duplex settings (Right arrow) button to select one of the following settings.
● 10T Full
● 10T Half
● 100T Full
● 100T Half
NOTE

The setting must match with the network device to which you are connecting (a network hub, switch, gateway, router, or computer).

5. Press HP Color Laserjet 2605 tcn cp go Link speed and duplex settings (Select). The printer will power cycle.
HP Color Laserjet 2605 Link speed and duplex settings