Configure a static IP address for my printer

Use the following steps to manually configure a static IP address from the control panel.

1.	Press (Left arrow) or (Right arrow) to select the Network config menu.
2.	Press (Select).
3.	Press (Left arrow) or (Right arrow) to select the TCP/IP menu.
4.	Press (Select).
5.	Press (Left arrow) or (Right arrow) to select Manual.
6.	Press (Select).
7.	Press (Left arrow) or (Right arrow) to enter the first three digits of the IP address.
8.	Press (Select) to save those digits and move to the next three digits of the IP address.
9.	Press (Left arrow) or (Right arrow) to enter the next three digits of the IP address.
10.	Press (Select) to save those digits and move to the next three digits of the IP address.
11.	Press (Left arrow) or (Right arrow) to enter the next three digits of the IP address.
12.	Press (Select) to save those digits and move to the next three digits of the IP address.
13.	Press (Left arrow) or (Right arrow) to enter the next three digits of the IP address.
14.	Press (Select).
15.	The control panel will display Yes. Press (Select) to save the configuration, or to delete and re-enter another IP address, press (Left arrow) or (Right arrow), which will change the display to No.
16.	After selecting the IP address, you will be prompted to enter the subnet mask and default gateway using steps 7-14 above.
17.	If at any time during the configuration you press (Cancel Job), the system will exit the menu and the addresses will not be saved.

HP Color Laserjet 2605 Configure a static IP address for my printer

HP Color Laserjet 2605